RGB-5050-300X-IP20 series flexible LED light strip with 300 high power super bright 5050SMD(SMD:Surface Mounted Devices) RGB LEDs. 3 chips.5 meter (197 in) non-weatherproof(IP20) flexible strips with adhesive backing, Cuttable every 3 LEDs along the cutting marks, according to practical requirement, so you could cut a different length for your project and request. When used with an RGB controller you can control the color output including solid colors, (red, green, blue, ect) gradient fading, and blinking.
This strip produces vibrant colors while at the same time being very energy efficient and not consuming a lot of power, Low power consumption. with 50,000+ hours long life span. 180-degree wide angle illumination, smooth and even light spread. The strip lights have separate RGB power inputs and common anode wire, Use any of our Universal RGB Controllers to dynamically control the strips - Due to voltage drop, after 10 meters run wire back to source. 12VDC operation, Low carbon, no radiation, no flicker, and no pollution to human and environment, Safe and stable.
Application & Photos
IP20 Non-waterproof (The PCB [Printed Circuit Board] surface of the bare , with self-adhesive back, For Indoor;IP65 Waterproof (Epoxy cover waterproof, Epoxy Resin,PCB surface is encapsulated with plastic Gel, with self-adhesive 3M back, For Outdoor & Indoor) ;IP67 Waterproof (Silicon sleeve waterproof,PCB is encapsulated with silicon tube, with plastic fastener, better waterproof, For Outdoor);IP68 Waterproof (Fully waterproof plastic irrigation,PCB both surface and back are encapsulated with plastic Gel, with plastic fastener, top level of waterproof, For Outdoor);
1).Tolerance of measurement of luminous intensity is ±10%.
2).Less 1% attenuation after 3, 000 hours.
3).Specifications are subject to change without notice.
4).In addition to your Flexible LED Strip Lights, you will also need a LED power supply, It's sold seperately. Our power supplies are available in a "plug and play" and mains ready format. a single power driver can be used to run multiple LED strips, so the length of the light strip determines the size of the power supply. available power as follows:
5050 SMD (300LEDs) DC12V 72W/5 meters, you need at least DC12V 6amp 72W power supply, we recommend DC12V 8amp 96W power supply.
We don't recommend to power more than 5 meters of LED Strips in series from a single power supply. For longer lengths, LED strips will need to be connected in parallel from the power supply of the larger.