This Wi-Fi LED Controller Hub is compatible with all TC4 series 2.4Ghz RF LED Controllers from ledstripsales.com. After completing this simple setup using just your smartphone or tablet and your existing or new LED lights and Wi-Fi compatible LED controller, you can have complete Wi-Fi control of all of your LED lights in your home. Wi-Fi LED Controller Hub for TC4 series products. Must be ordered to utilize mobile device control of RGB-WIFI-MINI-CON. Compatible with Apple (iPod, iPad, iPhone) and Android (phone and tablets) products. Includes 40" USB cable. Wireless control of multiple LED lights in the palm of your hand. WIFI controller hub is compatible with 2.4GHz RF remote RGB controllers. After completing a few simple setups, you will have a Wi-Fi control of all your LED lights simply by your smartphone or tablet.
1. Wire all controller devices to one power supply or power strips but don't turn it on yet.
2. With the power off,grab the smart device, and have app opened to your specific controller type.
3. power on the controller.
4. Within 3 seconds of providing power press the top button once in app on smart device. If programming was successful any connected light strip should blink twice slowly and remote will immediately be functional.
1 - Wi-Fi LED Controller Hub
1 - USB Cord
1 - Free Wireless Device App (download)
Wi-Fi Controller Specification
1:This control hub works with RF control unit.
2:Single Device Pairing allows one control hub and one remote control to communicate as a unique pair. Multi Devices Pairing allow one remote controller to
communicate with multiple control hubs without the required transmitting range.
3. All specifications are subject to change without notice.
DO NOT connect controller directly to 110-240V AC power. This controller requires a 5V DC power adaptor or USB port to power unit.
Only use the adaptor supplied; using a different adaptor can damage the device.
Be sure the power supply is not plugged into an outlet before connecting or disconnecting any of the systems components.
Always observe proper polarity when connecting power and load.
For safety reasons, do not open device, which will also void the warranty
DO NOT expose the controller to direct or indirect moisture.