LED Mini series waterproof IP67 three channel RGB amplifier. Maximum 4 Amps per channel/12 Amps total. Increases the load capability and extend the signal of the universal RGB controllers. Required if exceeding the maximum load capability of any universal RGB controller. RGB waterproof amplifier adjust to all the voltage-controlled LED controller of our company, it has waterproof function, RGB could accept PWM (Pulse Width Module), each one RGB amplifier can be added, the connecting number of LED will up to more than twice, countless RGB amplifiers could be connected in theory. 12/24VDC operation.
According to the screen prompts of RGB amplifier on the panel, connect the in/out signal wire by order, ensure short circuit can not occur between wire, then connect power wire for RGB amplifier.
Maximum number of light bars in one run (end to end) - for higher quantities, multiple runs back to the power supply, controller, or amplifier must be made to prevent excessive voltage drop Note: To determine the maximum number of any LED products on a single Power Supply - divide the total current capability of the power supply by the current draw of the LED product - then multiply that number by 0.8 (for 80% capacity).
About Some Different Single Color RGB or Color temperature LED Strip Lights Amplifier Connection Methods Please visit the BLOG
1 x LED Waterproof RGB Amplifier
1 x User manual
Supply voltage of this product is 12/24Volts DC, do not exceed
Shorting output wires my cause damage to amplifier
Always observe proper polarity when connecting power and load