This T-1000AC LED pixel module full color rain-proof controller with SD Card integrated power supply max control 2048 pixels. or can be run off a single DC 5V source if you're running DC 5V LED strips. Each controller can drive up to 2048 pixels using 256 brightness levels per color (24 bit color). Using the LED Edit 2012 software you can even upload video to be converted and executed across LED strips. Support all the various rules-shape, special shape processing. Also includes a 256MB SD card with preloaded WS2801 WS2811 WS2812B effects to get you started. Off-line use, can most support playing 16 program which store in the SD card. Designed with buttons adjustment, through the buttons on the controller, you can adjust the playback speed and choose the display program. Achieve to save the play list functions. Built-in lightning resistant and ESD protection circuit, ensure the safe and reliable. Can be waterproof IP66.
1. 32—256 Gray level, Support software Gamma correction.
2. Support the rules and special-shaped handle.
3. Single-port output, can support 2048 pixels.
4. Off-line(SD Card) control, play back content stored in the SD card.
5. T-1000S store a maximum of 16 programs, copy multiple files to the SD card in order, after formatting the SD card as “FAT” format.
6. The program must be named in orders . just as 00_1.led, 01_1.led, 02_1.led.
7. Compatible with single line or double line chips.
1. When T-1000AC controller control less than 512 lamps the frame rate can reach 30fps. When T-1000S control more than 512 lamps and less than 2048 lamps the frame rate will slow down automatically.
2. T-1000S must use the new software LedEdit software.
Click here to download software LedEdit 2014
Click here to download software LedEdit 2012
3. Online control please use T-300K online/offline controllers
Click here to download online control software Ledplayer 2014
Click here to download LedEdit 2013 operating manual
Click here to download T-1000AC editing program manual
Click here to download LedEdit with AutoCAD manual
A: SD card slot Before copy files to SD card, The SD card must be formatted as FAT format, The SD card in controller can not be hot-swappable, plug the SD card every time, you must first disconnect the power supply.
B: Electronic display screen Display speed, file, work status.
C: SPEED+ Speed up. Press speed+ and speed- at the same time the program will play circularly.
D: SPEED- Speed down. Select the speed increases, the speed level from the S-00, S-01, ............ S-99, the fastest for the S-00, turn down the speed of the slowest decline for S-99, by increasing and decreasing the two buttons to select. Reduce speed button, you can select the desired speed from the S-00 to S-99, in turn weakened.
E: AUTO and manual File selection, There are two modes: one is the C-01, ......; the other is the A-01 ....... For example: If you want a third effect, boot and press the button to automatically select the C-03 to manually release the button, it will execute and file the third cycle effect. For example: If you want all the effects loop, automatic and manual boot and press the button to display A-01 when the key is released, it will turn on the display shows all file names from the first file until the last file in cycles.
F: IC choose The controller is built into a conventional IC models on the market currently, when the boot is stable, press the button to select the IC chip choices when selecting the corresponding IC model, the operation is completed.
G: CLK Clock signal connector. When the chip for LED is single line chip just with data, then just need to be connected with DAT and GND of the controller. If the chip for LED is double line chip with DAT and CLK, then need to be connected with DAT, CLK, and GND of the controller.
H: DAT Date signal connector
I: GND Signal ground connector
J: AC Input power N/L AC220V
When not energized until the SD card into the slot. plug in 220V power supply, then open the switch controller, the digital display will show the 0000-0000, when the digital screen beating 0000-9999, and click any one of the four buttons, when displayed as 9999 after the release button, then the screen will be flashing and file name of C - 01 (the first file), and that at the beginning of the file copy, copy after the last file display screen will display SD - card words, file copy is complete.
1. Multiple T-1000AC controllers can be cascaded together and work synchronously.
2. T-1000AC one TTL(SPI) signal and one RS485 signal port output, can control 2048 pixels/lamps.
3. This T-1000AC controller max support 2048 pixels, Each of the LEDs IC is a pixel, so if you want support longer of LED strips ,please select more controller.
4. When the chip for LED is single line chip just with data, then just need to be connected with DAT and GND of the controller. If the chip for LED is double line chip with DAT and CLK, then need to be connected with DAT, CLK, and GND of the controller.
5. If you need to use RS485 signal you need to connect controller A interface with LED lamps A (DMX+), controller B interface with LED lamps B(DMX-),
6. If you need to control a new IC type by the controller, software code mode is, choose T-1000-IC model.
7. When the controller control less than 512 pixels the frame rate can reach 30fps, When control more than 512 pixels the frame rate will slow down automatically.