This DC12-24V 4 Ampere 3 Channel DMX Decoder LED Controller for RGB 5050 3528 LED Strip or bar Light. 3 Channel DMX Controller/Decoder can control up to 3 different 12VDC LED products or any one RGB LED Light Bar or Strip. 2 working modes, DMX modes and inside operating modes. Controller can run in stand alone mode using Address code switches or under DMX-512 digital control signals using XLR or RJ45 DMX-512 Input/Output interfaces. DMX decoding driver converts universal DMX512/1990 digital signal to PWM signal, transfer channel value to LED luminance value. which can be controlled by DMX512 console with 16-bit gray scale output per channel . Maximum load is 4 Amps per channel - 12 Amps total. Includes male and female 3-pin XLR connectors. Lifetime warranty on all DMX controllers.
Only power with 12/24VDC Power Supply to connect to 12/24 Volt Light Strips or unit will be damaged. Our Enclosed Power Supplies can be direct wired to "+" and "-" terminals on removable Green connector on side of unit.
Connect according to the above drawing and note that the Green Connectors can be unplugged from the unit.
Do not exceed 80% of Power Supply capacity when calculating Power Supply size to use in your system.
1). building decoration, business place, airport, subway station.
2). interior decoration, hotel, shopping mall KTV bars and square, restaurant, bar and home.
3). outdoor decoration: billboards, park, bridge, road transport, tourist attractions.
4). other: the adornment of motor vehicles, sample reveals ark decoration and other places need RGB lamps and lanterns.